Posted on Leave a comment

Sport Season is Here! Celebrate with DIY Sports Charms & More!

Sports Crafts

Attention All Team Parents! It's Time for Fall Sports!

Whether your team is trying to make a touchdown, goal, or run, we have the themed mold for you. Use our molds to make resin pieces, gummies, plastic chips, chocolate wafers and so much more! 

The ultimate sports silicone molds to take your snack time or celebration parties to the next level! 

Offer expires 9/30/22

Sports Bracelets:

What you will need:

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes.

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour into one of your SiliconeZone themed molds.

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: Once the resin is all set, remove your mold pieces.

Step 8: After removing, it’s time to get them ready to be placed on the clear button charm backs. These can be placed by either hot glue, super glue or even inset when the resin is still wet. 

Step 9: Once the clear button charm backs are secured, you can then snap them into your Silicone Wristbands! 

Make a pile for your next party and let the kids make their own bracelets. You can even use these crocs! 

Sports Crafts
Sports Crafts
Posted on Leave a comment

Bats, Pumpkins, & Ghosts Oh My! Time for Spooky Crafts & Big Savings!

halloween crafts

BOGO on the Halloween Themed Mold

Expires 10/31/22

Looking for some fun DIY crafts for halloween parties, costumes, or just a family fun activity? There is so many great projects you can create with our SiliconeZone Halloween Themed Mold! From headbands and slime to chocolate toppers for cupcakes and cookies… the ideas are endless…

Halloween Earrings

What you will need:

Step 1: Fill molds with resin. Please see bottom of post for instructions. 

Step 2: After the molds have set and you have your resin pieces, screw in the jewelry hardware to the tops of 2 halloween pieces. 

Step 3: You can leave the earrings as is or embellish with glitter, beads or other fun elements! 

Step 4: Wear and Enjoy!

halloween earrings

Halloween Slime

What you will need:

  • Epoxy Resin & Epoxy Resin Hardener
  • Disposable gloves
  • Disposable cup & stir stick
  • Mica powder (of your choosing)
  • SiliconeZone Halloween Themed Mold
  • Elmers Clear Glue – 6 oz bottle
  • Baking Soda – 1/2 tsp
  • Contact Lens Solution – 1 1/2 tbsp 
  • OR purchase pre-made slime

Step 1: Fill molds with resin. Please see bottom of post for instructions. 

Step 2: After the molds have set and you have your resin pieces set them aside to place into finished slime. 

Step 3: Combine Elmers Glue, mica powder and baking soda thoroughly.

Step 4: Slowly add in the content lens solution to your mixture. Need and mix until you are happy with the consistency of your slime. Add more contact lens solution slowly if needed.

Step 5: After your slime is to your liking, add in your new SiliconeZone Halloween resin pieces for fun! 

Halloween Headbands

What you will need:

  • Epoxy Resin & Epoxy Resin Hardener
  • Disposable gloves
  • Disposable cup & stir stick
  • Mica powder (of your choosing)
  • SiliconeZone Halloween Themed Mold
  • Plastic Headbands
  • Ribbon
  • Hot glue gun and glue sticks

Step 1: Fill molds with resin. Please see bottom of post for instructions. 

Step 2: After the molds have set and you have your resin pieces, set aside. 

Step 3: Take your ribbon and create a bow. Hot Glue the bow onto the plastic headband.

Step 4: Once the bow is glued on, take your halloween resin piece and glue it into the center of the bow. 

Step 5: Add any additional embellishments, wear and enjoy!

 

Base Instructions for Resin Pieces

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes (timing will depend on brand of resin).

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like, mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour into the SiliconeZone Molds. 

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: Once the resin is all set, it’s time to pop out the pieces! 

Step 8: After removing all of your resin molds, you are now ready to assemble. 

Posted on Leave a comment

BOGO Themed Molds & Baking Cups!

silicone Molds

Customize Your Back-To-School Gear!

OFFER ENDS 8/31/22

SiliconeZone offers a large selection of themed molds and other silicone products to help make the most amazing items. For a very limited time, we are offering Buy-One-Get-One on all baking cups and themed molds.

How to Make Graduation Keychains/Car Tags…
What you will need:

  • Epoxy Resin & Epoxy Resin Hardener
  • Disposable gloves
  • Disposable cup & stir stick
  • Mica powder (of your choosing)
  • SiliconeZone Baking Cups 
  • SiliconeZone Number Mold
  • String, Yarn or Keychains
  • Threaded Eyelets for Jewelry
  • Paper Graduation Hats & Paper Tags with Holes
    (Cricut® offers templates for different hat designs)

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes (timing will depend on brand of resin).

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour about a 1/8-1/4 inch deep into the SiliconeZone Baking Cups or SiliconeZone Number Molds. The depth in the Baking Cups will depend on how thick you want to round base to be. 

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: Once the resin is all set, it’s time to pop out the pieces. 

Step 8: After removing all of your resin molds, you are now ready to assemble. 

Step 9: For the Keychain: Carefully screw in the end of the keychain to the side of your base. For the Car Tag: Cut out a 2.25 inch paper tag with hole. Then hot glue this new paper tag to the back of the resin disc.  (Cricut® offers templates for different had designs)

Step 10: Hot glue the new resin numbers to the base disc created in the Backing Cups. After this is dry, hot glue the graduation caps to the sides of the resin numbers. 

Let these items dry and then enjoy! 

Posted on Leave a comment

Back to School Craft

Get Back to School Ready with DIY Crayons!

BOGO OFFER EXPIRES 8/31/22

Get creative and create your own supplies! 

Purchase your favorite SiliconeZone molds and create fun back to school supplies! From creating erasers to crayons, these fun projects are perfect for all ages! See below on how you can create your own crayons today!

DIY Crayons

What you will need:

  1. Crayons
  2. Your favorite Themed Mold
  3. Baking Sheet
  4. Oven
Directions:
  1. Preheat oven to 200 degrees.
  2. Break crayons into small pieces.
  3. Fill the molds with the broken crayon pieces.
  4. Place the molds on baking sheet and bake for 12-15 minutes or until the crayons are melted.
  5. Once melted, remove the baking sheet and transfer the molds into the freezer for 30 minutes.
  6.  After the molds have cooled off, you can then remove the molds and start coloring!
 
Posted on Leave a comment

Get Creative with Our Summer Molds!

Scrapbooking, Drink Markers, & Car Window Charms

Summer crafts for teens & adults!

Looking for some fun summer themed crafts? SiliconeZone Whale and Flamingo deep molds and Ocean thin wafer mold will leave you with endless possibilities for crafting ideas. Deep molds are perfect for creating drink markers & car window charms while thin molds are great for creating scrapbooking embellishments that will complete any page or card. Below are directions on how you can make your own embellishments, drink markers & car window charms.

Scrapbook Embellishments:

What you will need:

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes.

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour into the SiliconeZone Ocean mold.

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: The fun part! Once the resin is all set, it’s time to pop your cute ocean pieces out. 

Step 8: After removing all of your resin ocean molds, you are now ready to place these on your summer scrapbook page or on your beautiful handmade card. 

@siliconezoneusa Aloha! 🌺Time to get out in the beautful weather and enjoy a nice beverage. Make your own 🍸 drink markers and drink charms with our themes molds! 🛒 Shop now at siliconezone.com. Aloha! #drinkcharm #drinkmarker #diy #resinart #resin #fyp #siliconezone ♬ Hawaiian Luau With Ukulele - Loop 01 [Acoustic Folk] - FrequentlyAskedMusic

Drink Markers:

What you will need:

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes.

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour into the SiliconeZone Flamingo mold.

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: Once the resin is all set, it’s time to pop out these adorable flamingo pieces.

Step 8: After removing all of your resin flamingo molds, you are now ready to place these on your refreshing summer cocktail! Mark everyone’s drink with different color flamingos or create different molds. This is definitely a summer party must-have! 

Car Window Charms:

What you will need:

  • Epoxy Resin & Epoxy Resin Hardener
  • Disposable gloves
  • Disposable cup & stir stick
  • Mica powder (of your choosing)
  • SiliconeZone Flamingo, Ocean or Whale molds (or any type of SiliconeZone themed-mold)
  • Car Window
  • Hot Glue
  • Magnets 

Step 1: Make sure to protect your work area and to put on gloves.

Step 2: Add equal parts of epoxy resin & epoxy resin hardener to a disposable cup.

Step 3: With the stir stick, mix the equal parts for 5 minutes.

Step 4: Now is the time to add in any color mica powder to your resin mixture. Once you add in the color mica powder you’d like mix together for 2 minutes.

Step 5: Carefully take your mixture and slowly pour into one of your Siliconezone summer themed molds.

Step 6: Depending on the resin kit you’ve chosen the resin may have to cure up to 24 hours or less. Make sure to look at your brands instructions to see how long the resin will take to cure.

Step 7: Once the resin is all set, remove your summer mold pieces.

Step 8: After removing, it’s time to get them ready to be placed on your car! These can be placed by either hot glue, suction cups or magnets.

Step 9 (For Window): Grab your hot glue and place a little glue on the back of your mold. From there you can then place the mold on the window of your choosing. 

Step 10 (Car Magnet): Grab a small round magnet and hot glue to glue the magnet to the back of your mold. Once the magnet is on your mold, you now have a cute summer car magnet!

Posted on Leave a comment

Sidewalk Chalk with Silicone Molds

Looking for a fun and creative activity with the kids?... DIY Sidewalk Chalk!

Warm weather is here and it’s time for DIY sidewalk chalk!

SiliconeZone molds allow you to get creative whether you’re baking or crafting with endless project possibilities. These molds are perfect for DIY sidewalk chalk letting you turn your favorite molds into chalk. View the steps below to create own!

DIY Sidewalk Chalk

Ingredients:
Plaster of Paris
Warm water
Tempera paint

Tools:
Silicone mold tray
Popsicle sticks
Mixing cups
Measuring cups

Directions:

Step 1

Combine 1 ½ cup of warm water with 3 cup of Plaster of Paris in a mixing cup. Mix the two together with the Popsicle stick until you get a thick, soupy mixture. There should be no clumps (Plaster of Paris will begin to harden within 20 to 30 minutes so you will need to work quickly).

Note: If you’re doing more than one color you’ll need to mix them in separate mixing cups. If you’re afraid of plaster drying – do small batches ¼ cup water to ½ cup Plaster of Paris.

Step 2

Mix in 2 to 3 tablespoons of tempera paint. The more paint you use the brighter your color will be. Be sure that there are no streaks or swirls in your mixture. You want the color even.

Step 3

Transfer the mixture into your mold once the mixture begins to thicken. Be sure to wipe any spills and leaks with a damp paper towel before the chalk dries.

Step 4

Let the chalk dry. This will take a day. Keep in mind if using other molds the depth of the mold will determine how long it will take to dry.

To view the original recipe and more great ideas click here!